2400mm SMS Composite Nonwoven Fabric Machine

ASEN has been producing and supplying high-quality water-repellent or hydrophilic, perforated, super-soft, elastic SMS non-woven fabrics for the sanitary material industry, which are fully used in the production of sanitary napkins and diapers. This is a huge market for SMS Nonwoven Machine and includes surgical face masks, gas, and liquid filtration. In addition to this, SMS has a wide range of uses including insulation, medical healthcare, and sanitary products.

3200mm S Spunbond Nonwoven Fabric Machine

Stable production capacity and fast return on investment are one of the main reasons why most small and medium-sized spunbond nonwoven manufacturers choose our S Spunbond Nonwoven Machine. S Spunbond Nonwoven Machine provides the perfect solution for agricultural non-woven fabrics, industrial non-woven fabrics, packaging bags, garment linings and other industries.

SSMMS Composite Nonwoven Fabric Machine

SSMMS Nonwoven Machine can not only produce products covering spunbond fabrics, meltblown fabrics, SMS nonwoven fabrics, etc. The unique combination of multi-layer spunbond and meltblown structure, high barrier properties and breathability provide excellent materials for medical protection.

1600mm Online Water Electret Meltblown

PP meltblown nonwoven production line is a polymer melt extruded by a screw extruder. The polymer is extremely stretched by high-speed hot air or other means to form extremely fine short fibers, which are aggregated into a web and formed on a roll or screen curtain, and finally reinforced by self-adhesion or thermal bonding. Its unique properties are widely used  in mask filter materials, thermal insulation filling materials, medical and sanitary materials, wiping materials, etc.

1600mm Meltblown Spinneret Removal

How to remove Meltblown Machine Spinneret

Step 1: Quickly clean the surface of the removed components, and try to clean up the large pieces of mud remaining on the surface of the components.
Step 2: Hang the components on the workbench, and place them properly with the spinneret surface of the spinneret as the support.
Step 3: Remove all 142 M12 bolts on the connecting plate with an Allen wrench, and then use an impact hammer to pull out 4 φ12 straight pins.
Step 4: After hoisting and storing the connection board, take out the distribution board and place it properly.
Step 5: Install 4 M10 eyebolts on both sides of the spinneret, turn the spinneret upside down and place the spinneret outlet side up.
Step 6: Use a hex wrench to remove 25 M12 bolts on one side of the knife plate, leaving 1 bolt on the left, middle and right sides for fastening. Use an impact hammer to pull out 28 M16 set screws and 28 φ12 cylindrical pins.
Step 7: Install a T-shaped M16 handle in the threaded holes on the left, middle, and right positions of the knife plate, and three people support it separately, and then remove the remaining three M12 bolts.
Step 8: Three people screw into the T-handle separately. When the knife plate is lifted and separated from the spinneret, the knife plate on this side can be moved to the workbench for placement.
Step 9: The blade on the other side can be removed in the same way.

More info or customized solutions?

We are there for you

asen contact with ASEN Nonwoven Machine
Scroll to Top